Paying a high price to get a high-priced 350-401 dumps is not necessarily successful. Passing the Cisco CCNP 350-401 exam requires correct, up-to-date 350-401 dumps.
Success cannot be achieved at a high price. To solve this problem, Pass4itSure has launched the latest 350-401 dumps https://www.pass4itsure.com/350-401.html to help you, at a low cost for everyone. (Only $45.99)
Why is it impossible to succeed in the 350-401 exam at a high price?
Because success depends not on the price of the 350-401 dumps, but on the quality of the dumps.
High price does not equal high quality! Some unethical providers define 350-401 dumps for a hundred dollars at exorbitant prices, but the content is really outdated, repetitive, and will not help you in the slightest!
The low price also has high-quality Cisco 350-401 dumps!
There are also some people who adhere to the principles of honesty, truthfulness, and trustworthiness, and provide you with real-time updated 350-401 dump exam preparation resources at moderate prices and serve candidates wholeheartedly to help you complete the exam.
Pass4itSure is just that. It is a compilation of the latest 350-401 exam learning materials, providing you with the newest exam practice questions, all based on actual exam content. The 350-401 dumps, a collection of questions from painstaking work, expert preparation, and constant feedback, will make it easy to pass the 350-401 exam.
Free 350-401 dumps questions pdf (2023)
Want to pass the Cisco 350-401 exam at a low cost? Want to get free 350-401 dumps? That’s right, we’ve collected the latest questions for the 350-401 exam, and there’s a PDF available for free download.
Cisco ENCOR 350-401 practice questions online practice
350-401 Practice Question 1:
What is a characteristic of a type 2 hypervisor?
A. ideal for data center
B. complicated deployment
C. ideal for client/end-user system
D. referred to as bare-metal
Correct Answer: C
350-401 Practice Question 2:
Which VXLAN component is used to encapsulate and decapsulate Ethernet frames?
A. VNI
B. GRE
C. VTEP
D. EVPN
Correct Answer: C
VTEP (Virtual Tunnel Endpoint) – This is the device that does the encapsulation and de-encapsulation.
350-401 Practice Question 3:
Refer to the exhibit.
An engineer must establish eBGP peering between router R3 and router R4. Both routers should use their loopback interfaces as the BGP router ID.
Which configuration set accomplishes this task?
A. R3(config)#router bgp 200 R3(config-router)#neighbor 10.4.4.4 remote-as 100 R3(config-router)# neighbor 10.4.4.4 update-source Loopback0
R4(config)#router bgp 100
R4(config-router)#neighbor 10.3.3.3 remote-as 200
R4(config-router)#network 10.3.3.3 update-source Loopback0
B. R3(config)#router bgp 200 R3(config-router)#neighbor 10.24.24.4 remote-as 100 R3(config-router)#neighbor 10.24.24.4 update-source Loopback0
R4(config)#router bgp 100
R4(config-router)#neighbor 10.24.24.3 remote-as 200
R4(config-router)#neighbor 10.24.24.3 update-source Loopback0
C. R3(config)#router bgp 200 R3(config-router)#neighbor 10.4.4.4 remote-as 100 R3(config-router)#bgp router-id 10.3.3.3
R4(config)#router bgp 100
R4(config-router)#neighbor 10.3.3.3 remote-as 200
R4(config-router)#bgp router-id 10.4.4.4
D. R3(config)#router bgp 200 R3(config-router)#neighbor 10.24.24.4 remote-as 100 R3(config-router)#bgp router-id 10.3.3.3
R4(config)#router bgp 100
R4(config-router)#neighbor 10.24.24.3 remote-as 200
R4(config-router)#bgp router-id 10.4.4.4
Correct Answer: D
350-401 Practice Question 4:
Which protocol does REST API rely on to secure the communication channel?
A. TCP
B. HTTPS
C. SSH
D. HTTP
Correct Answer: B
The REST API accepts and returns HTTP (not enabled by default) or HTTPS messages that contain JavaScript Object Notation (JSON) or Extensible Markup Language (XML) documents. You can use any programming language to generate the messages and the JSON or XML documents that contain the API methods or Managed Object (MO) descriptions.
350-401 Practice Question 5:
Which of the following statements regarding BFD are correct? (Select 2 choices.)
A. BFD is supported by OSPF, EIGRP, BGP, and IS-IS.
B. BFD detects link failures in less than one second.
C. BFD can bypass a failed peer without relying on a routing protocol.
D. BFD creates one session per routing protocol per interface.
E. BFD is supported only on physical interfaces.
F. BFD consumes more CPU resources than routing protocol timers do.
Correct Answer: AB
350-401 Practice Question 6:
Refer to the exhibit.
An engineer has configured Cisco ISE to assign VLANs to clients based on their method of authentication, but this is not working as expected. Which action will resolve this issue?
A. require a DHCP address assignment
B. utilize RADIUS profiling
C. set a NAC state
D. enable AAA override
Correct Answer: D
350-401 Practice Question 7:
Refer to the exhibit.
An engineer must ensure that all traffic leaving AS 200 will choose Link 2 as the exit point. Assuming that all BGP neighbor relationships have been formed and that the attributes have not been changed on any of the routers. Which configuration accomplishes the task?
A. R4(config-router)bgp default local-preference 200
B. R3(config-router)neighbor 10.1.1.1 weight 200
C. R3(config-router)bgp default local-preference 200
D. R4(config-router)nighbor 10.2.2.2 weight 200
Correct Answer: A
Local preference is an indication to the AS about which path has a preference to exit the AS in order to reach a certain network. A path with a higher local preference is preferred. The default value for local preference is 100.
Unlike the weight attribute, which is only relevant to the local router, local preference is an attribute routers exchange in the same AS.
The local preference is set with the “bgp default local-preference value ” command. In this case, both R3 and R4 have exit links but R4 has a higher local preference so R4 will be chosen as the preferred exit point from AS 200.
350-401 Practice Question 8:
An engineer must configure a new loopback Interface on a router and advertise the interface as a fa4 in OSPF. Which command set accomplishes this task?
A. R2(config)# interface Loopbacko R2(config-if)# ip address 172.22.2.1 255.255.255.0
R2(config-if)# ip ospf 100 area 0
B. R2(config)# interface Loopbacko R2(config-if)# ip address 172.22.2.1 255.255.255.0 R2(config-if)# ip ospf network point-to-point R2(config-if)#ip ospf 100 area 0
C. R2(config)# interface Loopbacko R2(config-if)# ip address 172.22.2.1 255.255.255.0 R2(config-if)# ip ospf network point-to-multipoint R2(config-if)# router ospf 100 R2(config-router)# network 172.22.2.0 0.0.0.265 area 0
D. R2(config)# interface Loopbacko R2(config-if)# ip address 172.22.2.1 255.255.255.0 R2(config-if)# ip ospf network broadcast R2(config-if)# ip ospf 100 area 0
Correct Answer: B
When OSPF is running on a given loopback interface, it sees the network type of “LOOPBACK” and it knows that it can not establish an adjacency through that loopback interface with another router so it advertises that loopback as a host route or the only IP address on that logical interface.
As Martin explained so nicely you can tell OSPF that it is not a loopback and a point-to-point network type, and OSPF says “OK I am going to advertise the interface with its correct mask”.
In an MPLS environment where OSPF is the IGP in the core, and you have configured the loopback interface of the PE router with a /24 mask, you can have some problems, because there is a discrepancy, the loopback\’s mask is 24 but OSPF is advertising a mask of /32.
There are a few solutions to fix this problem, one solution is to reconfigure the mask to be /32, and another solution is to configure the loopback interface with “ip ospf network point-to-point”.
350-401 Practice Question 9:
DRAG DROP
An engineer plans to use Python to convert text files that contain device information to JSON Drag and drop the code snippets from the bottom onto the blanks in the code to construct the request. Not all options are used.
Select and Place:
Correct Answer:
350-401 Practice Question 10:
Refer to the exhibit.
Which privilege level is assigned to VTY users?
A. 1
B. 7
C. 13
D. 15
Correct Answer: A
Lines (CON, AUX, VTY) default to level 1 privileges.
350-401 Practice Question 11:
Which two statements about VRF-lite are factual? (Choose two)
A. It can support multiple customers on a single switch
B. It supports most routing protocols, including EIGRP, ISIS, and OSPF
C. It should be used when a customer\’s router is connected to an ISP over OSPF
D. It can increase the packet switching rate
E. It supports MPLS-VRF label exchange and labeled packets
Correct Answer: AC
VRF-lite does not support IGRP and ISIS.
1. VRF-lite does not support all MPLS-VRF functionality: label exchange, LDP adjacency, or labeled packets.
2. VRF-lite does not affect the packet switching rate.
3. The capability vrf-lite subcommand under router ospf should be used when configuring OSPF as the routing protocol between the PE and the CE.
350-401 Practice Question 12:
DRAG DROP
Drag and drop the virtual components from the left onto their deceptions on the right.
Select and Place:
Correct Answer:
350-401 Practice Question 13:
An engineer must configure the interface GigabitEthernet0/0 for VRRP group 10. When the router has the highest priority in the group, it must assume the master role. To accomplish this task, which command set must be added to the initial configuration?
Initial Configuration interface GigabitEthernet0/0description To IDF A 38-24-044.40ip address 172.16.13.2 255.255.255.0
A. vrrp 10 ip 172.16.13.254 vrrp 10 preempt
B. standby 10 ip 172.16.13.254 standby 10 priority 120
C. vrrp group 10 ip 172.16.13 254.255.255.255.0 vrrp group 10 priority 120
D. standby 10 ip 172.16.13.254 255.255.255.0 standby 10 preempt
Correct Answer: A
In fact, VRRP has the preemption enabled by default so we don`t need the vrrp 10 preempt command. The default priority is 100 so we don`t need to configure it either.
But notice that the correct command to configure the virtual IP address for the group is vrrp 10 ip {ip-address} (not vrrp group 10 ip …) and this command does not include a subnet mask.
350-401 Practice Question 14:
DRAG DROP
Drag and drop the QoS mechanisms from the left to the correct descriptions on the right.
Select and Place:
Correct Answer:
350-401 Practice Question 15:
Using the EIRP formula, what parameter is subtracted to determine the EIRP value?
A. transmitter power
B. antenna cable loss
C. antenna gain
D. signal-to-noise ratio
Correct Answer: B
Once you know the complete combination of the transmitter power level, the length of cable, and the antenna gain, you can figure out the actual power level that will be radiated from the antenna.
This is known as the effective isotropic radiated power (EIRP), measured in dBm. EIRP is a very important parameter because it is regulated by governmental agencies in most countries.
In those cases, a system cannot radiate signals higher than a maximum allowable EIRP. To find the EIRP of a system, simply add the transmitter power level to the antenna gain and subtract the cable loss.
latest questions for the 350-401 pdf free download:
https://drive.google.com/file/d/1vd0-M9gbSw691vc5eBP_QxWBmCHD0xju/view?usp=share_link
Other Cisco CCNP exam resource sharing:
Better, Free Cisco 300-715 Exam Dumps Questions
Summary:
Now you understand what the title says? It is important to choose the appropriate 350-401 dumps for the ENCOR 350-401 exam. Pass4itSure 350-401 dumps are inexpensive and ideal for you. Come and pass the 350-401 exam at a low price! for the latest 350-401 dumps https://www.pass4itsure.com/350-401.html (966 Q&As)