[2020] Nokia 4A0-100, 4A0-106, 4A0-C01, 4A0-M02 Exam Questions, Nokia study materials

Are you trying the Nokia 4A0-100, 4A0-106, 4A0-C01, 4A0-M02 exams? Well, if you are, then you should consider finding the best Nokia exam questions Nokia dumps https://www.pass4itsure.com/nokia.html You can use them to prepare for the Nokia 4A0-100, 4A0-106,4A0-C01, 4A0-M02 exams on the first try.

Nokia Pdf Questions Answers to Clear Your Concept

Nokia 4A0-100 Pdf Dumpshttps://drive.google.com/open?id=1c7fgXRcrm9e3KTDTN44flcBDwdlpZfm8
Nokia 4A0-106 Pdf Dumpshttps://drive.google.com/open?id=1p1vqgTjpgro1_gIPL2cmvJQqMX2ayc1j
Nokia 4A0-C01 Pdf Dumpshttps://drive.google.com/open?id=1SpldxxSFI5vu9q4-CXtpNpdPgF-dF9bB
Nokia 4A0-M02 Pdf Dumpshttps://drive.google.com/open?id=1Eigq1AgSjZVuJvHu1fYVPbPEmOousiqe

Just like the real test | Nokia practice exam questions

Online practice questions

Nokia 4A0-100 practice exam questions 1-5

QUESTION 1

Certificationpdf 4A0-100 exam questions-q1

Based on the network diagram (click the Exhibit Button), what are the prefix, mask, and next-hop used on CR1 to setup
a default static route to R1?
A. 0.0.0.0/0 next-hop 10.2 3.2
B. 0.0.0.0/32 next-hop 10.2.3.2
C. 10.2.3.2/32 next-hop 0.0.0.0/0
D. 0.0.0.0/0 next-hop 192.168.2.0
Correct Answer: A

QUESTION 2
What kind of information can a Dynamic Host Configuration Protocol (DHCP) client receive?
A. MAC address of the default gateway.
B. IP addresses of other DHCP clients.
C. IP addresses offered to the client.
D. IP addresses of all DHCP servers.
Correct Answer: C

QUESTION 3
What is NOT a function of the IOM?
A. It forwards the data to the switch fabric.
B. It discards excess data packets.
C. It converts the incoming data to an internal format.
D. It performs Quality of Service operations and buffers incoming data.
Correct Answer: C

QUESTION 4
Which of the following are considered Virtual Private Networks? Choose all that apply.
A. IES
B. VPWS
C. VPLS
D. VPRN
Correct Answer: BCD

QUESTION 5
A CE device has a physical connection to which device in the service providers MPLS network?
A. CE always connects to a PE router.
B. CE always connects to a P router.
C. CE always connects to another CE device.
D. The CE does not connect to the service provider network.
Correct Answer: A

More 4A0-100 practice exam questions https://www.pass4itsure.com/4a0-100.html

Nokia 4A0-106 practice exam questions 1-5

QUESTION 1
Click the exhibit.

Certificationpdf 4A0-106 exam questions-q1

Based on the displayed configuration, which routes does PE3 place in the VPRN 10 routing table?
A. The routes learned from CE3 and PE1.
B. The route learned from CE3 only.
C. The routes learned from PE1 and PE2.
D. The routes learned from CE3 and PE2.
Correct Answer: A

QUESTION 2
Which of the following about BGP loops in a VPRN environment is TRUE?
A. Traditional BGP loop detection mechanisms are unable to detect a loop in a VPRN scenario.
B. BGP loops are detected in a VPRN when the customer has separate sites using the same BGP autonomous system
number.
C. The Alcatel-Lucent 7750 SR rejects routes containing AS_PATH loops by default.
D. When “remove-private” is configured at a PE, all routes received from the associated CE will have private AS
numbers removed.
Correct Answer: B

QUESTION 3
Click the exhibit.

Certificationpdf 4A0-106 exam questions-q3

For the inter-AS model C VPRN, which of the following is FALSE when an IP packet is sent from 192.1.1.1 to
192.2.1.1?
A. PE1 pushes three labels on the IP packet: a VPN label, a BGP label, and an LDP transport label.
B. ASBR1 pops the LDP and BGP labels and swaps the VPN label.
C. ASBR2 pops the BGP label and pushes an LDP transport label.
D. PE2 pops two labels and forwards the unlabeled packet to its destination.
Correct Answer: B

QUESTION 4
Click the exhibit.

Certificationpdf 4A0-106 exam questions-q4

Which of the following best describes the output from the Alcatel-Lucent 7750 SR?
A. RSVP-TE has signaled a VPRN label.
B. RSVP-TE has signaled both VPRN and LSP labels.
C. MP-BGP has signaled both VPRN and LSP labels.
D. MP-BGP has signaled a VPRN label.
Correct Answer: D

QUESTION 5
Which of the following terms also correctly describes a Layer 3 VPN?(Choose three)
A. VPRN
B. BGP/MPLS VPN
C. VLL
D. VPLS
E. IP-VPN
F. ePipe
Correct Answer: ABE

More 4A0-106 practice exam questions https://www.pass4itsure.com/4a0-106.html

Nokia 4A0-C01 practice exam questions 1-5

QUESTION 1
When configuring RSVP-TE for transport tunnels, which command enables RSVP by default?
A. configure router tunnel
B. configure router gre
C. configure router rsvp-te
D. configure router transport-tunnel
E. configure router mpls
Correct Answer: E

QUESTION 2
Which of the following about the Alcatel-Lucent 7750 SR sdp-ping is TRUE?
A. It tests the IGP reachability of the far-end IP address of an SDP.
B. It tests that the MTU settings of a service are correct.
C. It tests in-band, uni-directional or round-trip connectivity of SDPs.
D. It tests the reachability of hosts connected to an SDP.
Correct Answer: C

QUESTION 3
The LSP “toR6” is configured with a fully strict path on a Nokia 7750 SR. Which of the following configurations is
required to enable fast reroute for this LSP?

Certificationpdf 4A0-C01 exam questions-q3

A. Enable fast-reroute on all routers along the path, R1, R2, R4, and R6.
B. Enable both link-protection and node-protection on router R1.
C. Enable fast-reroute with either one-to-one or facility mode on this LSP.
D. Enable link-protection only on router R4.
Correct Answer: C

QUESTION 4
Click on the exhibit.

Certificationpdf 4A0-C01 exam questions-q4

Router R2 advertises an OSPF summary route 10.10.10.0/24 into Area 1. Router R3 receives labels for individual FECs
10.10.10.2/32 and 10.10.10.4/32. These two FECs are installed in router R3\\’s LIB but not in the LFIB. What needs to
be done on router R3 to install these labels into its LFIB?
A. Disable route summarization on router R3.
B. Enable LDP aggregate prefix match.
C. Create an import policy to accept 10.10.10.2/32 and 10.10.10.4/32.
D. Disable LDP exact match on 10.10.10.2/32 and 10.10.10.4/32.
Correct Answer: B

QUESTION 5
What are the types of networks supported on an Alcatel-Lucent 7750 SR for OSPF? (Choose 2)
A. Broadcast
B. Non-Broadcast Multi-Access
C. Point-to-Point
D. Point-to-Multipoint
Correct Answer: AC

More 4A0-C01 practice exam questions https://www.pass4itsure.com/4a0-c01.html

Nokia 4A0-M02 practice exam questions 1-5

QUESTION 1
Which of the following statements is FALSE regarding the Gx interface?
A. It is a Diameter-based interface between the PCRF and the PCEF.
B. The PCEF can act as a client or as a server for the Diameter connection depending on which application is running
over the Gx interface.
C. The PCEF receives the QoS information for a bearer from the PCRF over the Gx interface.
D. It runs a vendor specific application identified by an application ID value of 16777238.
E. It is never used to transport user data packets.
Correct Answer: B

QUESTION 2
On Alcatel-Lucent 7750 PGW, which of the following CLI commands can be used to check the IP addresses assigned to
a particular UE?
A. Show mobile-gateway pdn pdn-context
B. Show mobile-gateway serving pdn-context imsi detail
C. Show mobile-gateway pdn ue-context
D. Show mobile-gateway pdn ue-context imsi detail
E. Show mobile-gateway pdn bearer-context
F. Show mobile-gateway pdn bearer-context imsi detail
Correct Answer: A

QUESTION 3
Which of the following statements is FALSE regarding the EPS bearers?
A. The default bearer is initiated by either the UE or the PCRF.
B. The default bearer is always the first bearer established to an APN.
C. An AF server may initiate a dedicated bearer to a UE.
D. EPS bearers that connect a given UE to a single PGW may use different IP subnets.
E. The default bearer remains active throughout the lifetime of the APN connection.
Correct Answer: A

QUESTION 4
On the Alcatel-Lucent 7750 PGW, which of the following CLI commands is used to check the message statistics
between the PGW and the PCRF?
A. Show mobile-gateway pdn pdn-context
B. Show mobile-gateway pdn ref-point-stats ga
C. Show mobile-gateway pdn ref-point-stats gx
D. Show mobile-gateway pdn ref-point-peers gn
E. Show mobile-gateway pdn ref-point-peers gx
Correct Answer: C

QUESTION 5
On Alcatel-Lucent 7750 PGW, which of the following CLI commands can be used to debug a given IMSI?
A. debug mobile-gateway pdn 1 pdn-session imsi 226041000000008
B. debug mobile-gateway pdn 1 pdn-session-db imsi 226041000000008
C. debug mobile-gateway pdn 1 pdn-session imsi 226041000000008 apn ipd.alcatel-lucent.com
D. debug mobile-gateway pdn 1 pdn-session-db imsi 226041000000008 apn ipd.alcatel-lucent.com
E. Answers A and C are both correct.
F. Answers B and D are both correct.
Correct Answer: C

More 4A0-M02 practice exam questions https://www.pass4itsure.com/4a0-m02.html

Pass4itsure discount code “2020PASS”

Pass4itsure discount code 2020

Free Nokia 4A0-100 Pdf Dumps https://drive.google.com/open?id=1c7fgXRcrm9e3KTDTN44flcBDwdlpZfm8

Free Nokia 4A0-106 Pdf Dumps https://drive.google.com/open?id=1p1vqgTjpgro1_gIPL2cmvJQqMX2ayc1j

Free Nokia 4A0-C01 Pdf Dumps https://drive.google.com/open?id=1SpldxxSFI5vu9q4-CXtpNpdPgF-dF9bB

Free Nokia 4A0-M02 Pdf Dumps https://drive.google.com/open?id=1Eigq1AgSjZVuJvHu1fYVPbPEmOousiqe

Here, you will be able to receive a question-answer file for the Nokia exam,https://www.pass4itsure.com/nokia.html which will help you. Study hard!