Free 70-345 Exam Questions,Pass Your Microsoft 70-345 Exam Easy!

How can I pass the Microsoft 70-345 Exam?Microsoft MCSE 70-345 exam dumps & updated practice test questions to study and pass quickly and easily. Pass4itsure Experts can help you!https://www.pass4itsure.com/70-345.html 70-345 dumps – 100% Free Updated Microsoft 70-345 Questions & Answers.

New,Pass Microsoft MCSE 70-345 Exam in First Attempt Guaranteed!

Get 100% Real Exam Questions, Accurate & Verified Answers 

Free 70-345 Exam Questions in PDF Format:

https://drive.google.com/open?id=1We1_72K4IAJq9hdWHUb7vLt6skU9Tn2U

Go to 70-345 questions!2020

QUESTION 1
You have an Exchange Server 2010 organization that uses a namespace of mail.contoso.com.
You are migrating the email infrastructure to Exchange Server 2016.
You need to minimize the number of changes that end users must make to their Microsoft Outlook client as a result of
the migration.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
A. Enable Outlook Anywhere on all the Exchange Server 2010 Client Access servers.
B. Move the existing mail.contoso.com namespace to point to the Exchange Server 2016 servers.
C. Create a new namespace named legacy.contoso.com and point the namespace to the Exchange Server 2010
servers.
D. Run the Set-OutlookProvider cmdlet.
E. Create a new namespace named migration.contoso.com and point the namespace to the Exchange Server 2016
servers.
Correct Answer: AD
A: Outlook clients use Outlook Anywhere or MAPIHttp for internal connectivity to Exchange 2016 instead of MAPI/RPC.
D: The Set-OutlookProvider cmdlet creates the global settings for the Autodiscover service. It sets the
AutoDiscoverConfig object under the Global Settings object in Active Directory and sets the attributes specified in the
parameters listed in the Parameters section.
References: https://practical365.com/exchange-server/exchange-server-2016-migration-reviewing-namespaces/
https://technet.microsoft.com/en-us/library/bb123683(v=exchg.160).aspx

QUESTION 2
You begin to implement the Exchange Server 2016 servers and plan to decommission the Exchange Server 2013
servers during the next six months.
You need to recommend which actions must be performed to support the planned changes for document collaboration.
You install Microsoft Office Online Server on a new server.
Which two cmdlets should you recommend running next? Each correct answer presents part of the solution.
A. New-OfficeWebAppsFarm
B. Set-PartnerApplication
C. Set-MailboxServer
D. New-OfficeWebAppsHost
E. Set-OrganizationConfig
Correct Answer: AC

QUESTION 3
You have an Exchange Server 2016 organization. The organization contains one Edge Transport server.
A user reports that certain email messages expected from a specific recipient were never received.
You need to search for messages that were blocked by the Edge Transport server because they contain attachment
types that are blocked by the organization.
In which folder should you search?
A. QueueViewer
B. AgentLog
C. Connectivity
D. Routing
E. ProtocolLog
Correct Answer: E
References: http://exchangeserverpro.com/exchange-server-protocol-logging/

QUESTION 4
All the research and development department users are members of a distribution group named rdev. Rdev receives an
average of 2,000 email messages daily.
You need to ensure that email sent to the rdev distribution group meets the security requirements for confidential email.
The solution must minimize administrative effort.
What should you do?
A. Create linked mailboxes for users without security clearance.
B. Create a transport rule that filters based on keyword predicates.
C. Create mail contacts for users without security clearance.
D. Edit the distribution group properties and enable moderation of the group.
Correct Answer: B
Actions in mail flow rules (also known as transport rules) specify what you want to do to messages that match conditions
of the rule.
References: https://technet.microsoft.com/en-us/library/aa998315(v=exchg.160).aspx

QUESTION 5
You have an Exchange Server 2016 organization.
All users work from a main office and use Microsoft Outlook 2016.
You recently ran the Microsoft Office 365 Hybrid Configuration Wizard and moved most of the user mailboxes to
Exchange Online. A network administrator reports an increase in the amount of outbound SMTP traffic from the
network.
You need to reduce the amount of bandwidth utilization for the outbound SMTP traffic.
What should you do?
A. From the Exchange Server organization, create a Receive connector that uses the IP address of Exchange Online as
a remote range.
B. From the public DNS zone, modify the MX record to point to Exchange Online.
C. From the public DNS zone, modify the SRV record to point to Exchange Online.
D. From the Exchange Server organization, create a Send connector that uses Exchange Online as an SMTP smart
host.
Correct Answer: B
The path messages sent to recipients in your on-premises and Exchange Online organizations take depends on how
you decide to configure your MX record in your hybrid deployment. The Hybrid Configuration wizard doesn\\’t configure
the routing for inbound Internet messages for either the on-premises or Exchange Online organizations. You must
manually configure your MX record if you want to change how your inbound Internet mail is delivered.
References:https://technet.microsoft.com/en-us/library/jj659050(v=exchg.150).aspx

QUESTION 6
You need to recommend which actions must be performed to upgrade the organization to Exchange Server 2016. The
solution must meet the availability requirements.
Which five actions should you recommend be performed in sequence? To answer, move the appropriate actions from
the list of actions to the answer area and arrange them in the correct order.
Select and Place:

Pass4itsure Microsoft 70-345 exam questions q6

Correct Answer:

Pass4itsure Microsoft 70-345 exam questions q6-2

QUESTION 7
You plan to deploy Exchange Server 2016 to a new server. The server will host 1,000 mailboxes.
You need to identify whether the new server has the required disk throughput and speed.
Which two tools should you use? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
A. LoadGen
B. the Exchange Server Best Practices Analyzer Tool
C. Jetstress
D. Isinteg
E. the Exchange Server Role Requirements Calculator
Correct Answer: AC
To determine how many Exchange servers are required to manage user load, use the following capacity planning tools:
Microsoft Exchange Jetstress Microsoft Exchange Load Generator
Note: The Jetstress tool is designed to simulate Exchange I/O at the database level by interacting directly with the
database technology of the Extensible Storage Engine (ESE), also known as Jet, that Exchange is built on. Jetstress
can be configured to test the maximum I/O throughput available to your disk subsystem within the required performance
constraints of Exchange, or it can accept a desired profile of user count and I/Os per second per user and validate that
the disk subsystem is capable of maintaining an acceptable level of performance with such a profile. Jetstress testing
can be used to validate storage reliability and performance prior to the deployment of Exchange servers. You should run
Jetstress if you are concerned about your storage subsystem performance or if you need to determine a system\\’s I/O
capacity.
The Load Generator (LoadGen) tool is designed to produce a simulated client workload against a test Exchange
deployment. This workload can be used to evaluate how Exchange performs, and can also be used to analyze the effect
of various configuration changes on Exchange behavior and performance while the system is under load Use the output
from these tests in the following ways: Validate deployments Calculate the client computer response time for the server
configuration under client load Estimate the number of users per server Identify bottlenecks on the server
References: https://technet.microsoft.com/en-us/library/dd335108(v=exchg.141).aspx

QUESTION 8
HOTSPOT
You have an Exchange Server organization. The organization contains four servers. The servers configured as shown
in the following table.

Pass4itsure Microsoft 70-345 exam questions q8

You plan to upgrade the organization to Exchange Server 2016. You need to identify which servers have functionalities
that can be fully achieved by using Exchange Server 2016. What should you identify? To answer, select the appropriate
options in the answer area.
Hot Area:

Pass4itsure Microsoft 70-345 exam questions q8-2

Correct Answer:

Pass4itsure Microsoft 70-345 exam questions q8-3

QUESTION 9
DRAG DROP
You have an Exchange Server 2010 organization. The organization has 500 mailboxes and three servers. The servers
are configured as shown in the following table.

Pass4itsure Microsoft 70-345 exam questions q9

EX10EDGE is located in the perimeter network. EX10CH has an Edge Subscription. All Internet mail flows through
EX10EDGE.
You deploy an Exchange Server 2016 Mailbox server named EX16MBX to the organization. You deploy an Exchange
Server 2016 Edge Transport server named EX16EDGEtothe perimeter network.
You need to transition all Internet mail to flow through EX16EDGE. The solution must minimize disruptions to the mail
flow.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions
to the answer area and arrange them in the correct order.
Select and Place:

Pass4itsure Microsoft 70-345 exam questions q9-2

QUESTION 10
Your network contains a single Active Directory forest. The forest contains two sites named Site1 and Site2.
You have an Exchange Server 2016 organization. The organization contains two servers in each site. You have a
database availability group (DAG) that spans both sites. The file share witness is in Site1.
If a power failure occurs at Site1, you plan to mount the databases in Site2.
When the power is restored in Site1, you need to prevent the databases from mounting in Site1.
What should you do?
A. Disable AutoReseed for the DAG.
B. Implement an alternate file share witness.
C. Configure Datacenter Activation Coordination (DAC) mode.
D. Force a rediscovery of the network when the power is restored.
Correct Answer: C
References: https://technet.microsoft.com/en-us/library/dd979790(v=exchg.150).aspxQUESTION 10
Your network contains a single Active Directory forest. The forest contains two sites named Site1 and Site2.
You have an Exchange Server 2016 organization. The organization contains two servers in each site. You have a
database availability group (DAG) that spans both sites. The file share witness is in Site1.
If a power failure occurs at Site1, you plan to mount the databases in Site2.
When the power is restored in Site1, you need to prevent the databases from mounting in Site1.
What should you do?
A. Disable AutoReseed for the DAG.
B. Implement an alternate file share witness.
C. Configure Datacenter Activation Coordination (DAC) mode.
D. Force a rediscovery of the network when the power is restored.
Correct Answer: C
References: https://technet.microsoft.com/en-us/library/dd979790(v=exchg.150).aspx

QUESTION 11
HOTSPOT
You have an Exchange Server 2016 organization and a Microsoft Office 365 subscription configured in a hybrid
deployment. The deployment contains 500 user mailboxes.
Users who have mailboxes in Office 365 report that they cannot view the availability information of users who have
mailboxes in Exchange Server 2016.
You need to ensure that the users hosted in Office 365 can view the availability information of the mailboxes hosted in
on-premises Exchange Server.
Which command should you run on an Exchange Server? To answer, select the appropriate options in the answer
area.
Hot Area:

Pass4itsure Microsoft 70-345 exam questions q11

Correct Answer:

Pass4itsure Microsoft 70-345 exam questions q11-2

QUESTION 12
Your company has an Exchange Server 2016 organization.
The organization contains three Mailbox servers.
You need to ensure that email messages sent to the company meet the following requirements:
-All of the messages sent from the SMTP domain of fabrikam.com must be blocked.
-All of the messages that contain the words “Fabrikam” or “Litware” must be quarantined.
Which anti-spam agent should you configure for each requirement? To answer, drag the appropriate agents to the
correct requirements. Each agent may be used once, more than once, or not at all. You may need to drag the split bar
between
panes or scroll to view content.
Select and Place:

Pass4itsure Microsoft 70-345 exam questions q12

Correct Answer:

Pass4itsure Microsoft 70-345 exam questions q12-2

QUESTION 13
You have an Exchange Server organization. The organization contains servers that have Exchange Server 2010 and
Exchange Server 2016 installed.
You establish a hybrid deployment between Exchange Server and Microsoft Office 365.
Some users have on-premises mailboxes and personal archives in Exchange Online.
You discover that you are unable to use In-Place eDiscovery to search user mailboxes and Exchange Online Archiving
archives concurrently.
You need to recommend a solution to ensure that In-Place eDiscovery can search the mailboxes and the personal
archives concurrently.
What should you include in the recommendation?
A. OAuth authentication
B. an organization relationship
C. a retention policy
D. the Mailbox Replication service (MRS)
Correct Answer: A
References: https://technet.microsoft.com/en-us/library/dd298021(v=exchg.160).aspx

Designing and Deploying Microsoft Exchange Server 2016 (70-345) Exam Study materials

𝐸π‘₯π‘Žπ‘šπ΅π‘¦: π‘€π‘–π‘π‘Ÿπ‘œπ‘ π‘œπ‘“π‘‘
𝐸π‘₯π‘Žπ‘šπΆπ‘œπ‘‘π‘’: 70βˆ’345
𝐸π‘₯π‘Žπ‘šπ‘π‘Žπ‘šπ‘’: π·π‘’π‘ π‘–π‘”π‘›π‘–π‘›π‘”π‘Žπ‘›π‘‘ π·π‘’π‘π‘™π‘œπ‘¦π‘–π‘›π‘” π‘€π‘–π‘π‘Ÿπ‘œπ‘ π‘œπ‘“π‘‘ 𝐸π‘₯π‘β„Žπ‘Žπ‘›π‘”π‘’ π‘†π‘’π‘Ÿπ‘£π‘’π‘Ÿ 2016
π‘…π‘’π‘™π‘Žπ‘‘π‘’π‘‘πΆπ‘’π‘Ÿπ‘‘π‘–π‘“π‘–π‘π‘Žπ‘‘π‘–π‘œπ‘›(𝑠): 𝑀𝐢𝑆𝐸

[2018 Certification Dumps] 100% Success Rate Microsoft MCSE 70-246 Dumps System Center 2012 Exam Questions Answers Video Training For Download

For those who like to read this book,Exam Ref 70-345 book from Microsoft Press is the official training guide.

For those who like to learn from video training, check here:

2020 offer code:”2020PASS”

Pass4itsure discount code 2020PASS

Latest Microsoft MCSE 70-345 practice test questions with Pass4itsure.You can pass Designing and Deploying Microsoft Exchange Server 2016 certification exam very simply and easily with our free 70-345 dumps.